Nationwide shipping on new & used auto parts 15,000+ parts in stock for Audi, BMW, Mercedes-Benz, Porsche & more Need fitment help? Call (303) 418-3426

24/7 Support

(303) 418-3426

Home / Brakes / Brakes > Big Brake Kits (BBK) / Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1

Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1

Available on backorder

$6,370.00

Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1: forged 4-piston monoblock rear calipers with E-Slit rotors. Ships nationwide with expert fitment support from Diamond Parts.

Available on backorder

Not sure it fits?

Send us your VIN and we’ll confirm fitment before you buy.

SKU: 47A9641A Category:

Description

When you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1, you get a proven Endless Racing MONO4r package: forged 4-piston monoblock rear calipers with E-Slit rotors. The high-revving AP1 S2000 is a track-day classic, and track days expose the limits of its original brakes.

Why Buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1 from Diamond Parts?

Shopping with Diamond Parts means secure checkout, fast tracked shipping and real people who know brakes. Looking for something different? Our big brake kit range covers dozens of vehicles, and our brakes department has pads, rotors and complete systems.

Key Features

Here is what you get when you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1:

  • Balances an upgraded front axle so the rear does its share of the work
  • Stiff one-piece forged body for a firm pedal on the last lap as much as the first
  • E-Slit rotor design with an easy visual wear check
  • Pads for fast road or track use
  • Everything needed for the rear axle in one kit

Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1 Specifications

Product Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1
Brand Endless
Product line Racing MONO4r
Position Rear axle
Vehicle fitment Honda S2000 AP1
Caliper Endless Racing MONO4r (EC4606N), forged monoblock
Pistons 4 per caliper
Caliper weight Approx. 2,260 g each
Caliper dimensions 141 x 72.5 x 270 mm
Finish Ultra-hard anodized
Rotors Large-diameter E-Slit rotors (300 to 355 mm range, size specific to vehicle)
Brake pads Endless pad set included (Type R, MX72 or MX72 Plus compounds)
Brake lines Stainless steel, 2 included
Kit includes 2 calipers, 1 pad set, 2 caliper brackets, 2 rotors, 2 brake lines
SKU 47A9641A

Fitting Tips for a Smooth Install

Once you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1, you will find the included brackets are made for your vehicle, so the kit bolts on without cutting or drilling. Use fresh, high-temperature brake fluid when you bleed the system, tighten every bolt to the correct torque, and check that the new lines have enough slack and stay clear of moving suspension parts. Turn each wheel by hand before driving to confirm the caliper clears the inside of the rim with room to spare.

How to Bed In Your New Brakes

After you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1, a careful bed-in procedure gets the best from fresh pads and rotors. Make several medium stops from about 40 mph to 10 mph, then a few harder stops from higher speeds, without holding the car stationary on hot brakes. A slow cool-down drive afterwards lets the pad material settle evenly onto the rotors, which gives you a firm pedal and consistent bite from the very first week.

Choosing the Right Pad Compound

Before you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1, think about how you drive. Street-focused compounds give quiet operation, low dust and good cold bite for daily driving, while track compounds hold up to much higher temperatures without fading. If your car sees both commutes and occasional track days, a dual-purpose pad is often the best compromise. Our team can recommend a compound based on how you drive, your tyres and your power level, so you get the most from your purchase when you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1.

Looking After Your Brakes

After you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1, inspect the pads and rotors on a regular schedule and after every track day. Change the brake fluid at least once a year, since moisture lowers its boiling point. Wash the calipers with mild soap and water and avoid acidic wheel cleaners, which can dull the finish over time.

To learn more about the engineering behind these components, visit the official Endless website.

Fitment and Compatibility

Designed for the Honda S2000 AP1. Exact fitment can vary with model year, trim and wheel design, so send us your VIN and wheel specification through our contact page and we will double-check everything before your kit ships.

Stop guessing and start braking later. Buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1 from Diamond Parts, or call (303) 418-3426 and we will help you choose the right setup.

Reviews

There are no reviews yet.

Be the first to review “Endless MONO4R Rear Big Brake Kit for Honda S2000 AP1”

Your email address will not be published. Required fields are marked *

Your trusted source for quality new and carefully inspected used auto parts since 2008. Real people, real parts, shipped nationwide.

© 2026 Diamond Car Parts. All rights reserved.