Description
Ready to buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP2? This rear upgrade pairs forged 4-piston monoblock rear calipers with E-Slit rotors, built specifically for the Honda S2000 AP2. The AP2 S2000 loves high revs and late braking, and a brake upgrade lets you use all of it.
Why Buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP2 from Diamond Parts?
We stock performance brake systems from leading brands such as Endless, AP Racing, Alcon and StopTech. Compare more big brake kits, see our complete brakes collection, and read our shipping policy for delivery times.
Key Features
Here is what you get when you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP2:
- Forged monoblock rear caliper with four pistons to match a big front kit and restore brake balance
- Ultra-hard anodized body built for repeated heat cycles
- Large E-Slit rotors that clean the pads and fight fade
- Choice of Endless Type R, MX72 or MX72 Plus pad compounds
- Bolt-on rear package with brackets and stainless lines
Endless MONO4R Rear Big Brake Kit for Honda S2000 AP2 Specifications
| Product | Endless MONO4R Rear Big Brake Kit for Honda S2000 AP2 |
|---|---|
| Brand | Endless |
| Product line | Racing MONO4r |
| Position | Rear axle |
| Vehicle fitment | Honda S2000 AP2 |
| Caliper | Endless Racing MONO4r (EC4606N), forged monoblock |
| Pistons | 4 per caliper |
| Caliper weight | Approx. 2,260 g each |
| Caliper dimensions | 141 x 72.5 x 270 mm |
| Finish | Ultra-hard anodized |
| Rotors | Large-diameter E-Slit rotors (300 to 355 mm range, size specific to vehicle) |
| Brake pads | Endless pad set included (Type R, MX72 or MX72 Plus compounds) |
| Brake lines | Stainless steel, 2 included |
| Kit includes | 2 calipers, 1 pad set, 2 caliper brackets, 2 rotors, 2 brake lines |
| SKU | 0051F0DE |
Installing Your New Brake Kit
When you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP2 from Diamond Parts, the kit comes with vehicle-specific mounting brackets, so installation is a bolt-on job for an experienced mechanic or a well-equipped home garage. Bleed the system with fresh, high-temperature brake fluid, torque all caliper and bracket bolts to specification, and make sure the brake lines are routed clear of the suspension and wheels at full steering lock. Before the first drive, spin each wheel by hand to confirm there is no contact between the caliper and the inside of the rim.
Bedding In the Pads and Rotors
After you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP2 and fit it, the new pads and rotors need a proper bed-in to perform at their best. Start with a series of moderate stops from around 40 mph down to 10 mph, then follow with several firmer stops from higher speeds, avoiding coming to a complete stop while the brakes are hot. Finish with a gentle drive to let everything cool. This lays an even layer of pad material onto the rotor faces for smooth, quiet and consistent braking.
Choosing the Right Pad Compound
Before you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP2, think about how you drive. Street-focused compounds give quiet operation, low dust and good cold bite for daily driving, while track compounds hold up to much higher temperatures without fading. If your car sees both commutes and occasional track days, a dual-purpose pad is often the best compromise. Our team can recommend a compound based on how you drive, your tyres and your power level, so you get the most from your purchase when you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP2.
Maintenance and Care
When you buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP2, plan a simple maintenance routine. Check pad thickness and rotor condition regularly, especially after track use. Replace brake fluid at least once a year, or before every track season, because fluid absorbs moisture and its boiling point drops over time. Clean the calipers with mild soap and water rather than harsh wheel cleaners to protect the finish.
To learn more about the engineering behind these components, visit the official Endless website.
Fitment and Compatibility
This kit is listed for the Honda S2000 AP2. Big brake kits must clear your wheels, so please check your wheel size and design before ordering. Not sure? Contact our team with your VIN and wheel details and we will confirm fitment for you.
Upgrade with confidence: Buy Endless MONO4R Rear Big Brake Kit for Honda S2000 AP2 today, or call our parts team on (303) 418-3426 for advice.





Reviews
There are no reviews yet.