Nationwide shipping on new & used auto parts 13,000+ parts in stock for Audi, BMW, Mercedes-Benz, Porsche & more

24/7 Support

(303) 418-3426

Home / Brakes / Big Brake Kits (BBK) / Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD

Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD

Available on backorder

$4,890.00

Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD: Endless Drift 6 calipers with slit-face rotors. Ships nationwide with expert fitment support from Diamond Parts.

Available on backorder

Not sure it fits?

Send us your VIN and we’ll confirm fitment before you buy.

SKU: 3BB2CB28 Categories: ,

Description

When you buy Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD, you get a proven Endless Drift 6 package: Endless Drift 6 calipers with slit-face rotors. The Mazda RX-7 FD rewards drivers who push it, and a proper big brake upgrade adds the stopping power and heat capacity to match.

Why Buy Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD from Diamond Parts?

We stock performance brake systems from leading brands such as Endless, AP Racing, Alcon and StopTech. Compare more big brake kits, see our complete brakes collection, and read our shipping policy for delivery times.

Key Features

Here is what you get when you buy Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD:

  • Forged Endless Drift 6 calipers
  • Large slit-face rotors for clean pads and stable friction
  • Strong bite with excellent modulation
  • Includes pads, brackets and brake lines

Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD Specifications

Product Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD
Brand Endless
Product line Drift 6
Position Rear axle
Vehicle fitment Mazda RX-7 FD
caliper Endless Drift 6, forged, 6 pistons
Rotors 2-piece slit-face rotors
Pad compounds SSM, TR, MX72 and MX72 Plus
Kit contents 2 calipers, 2 rotors, 1 pad set, 2 mounting brackets and 2 brake lines
Caliper finish Endless anodized finish
SKU 3BB2CB28

Fitting Tips for a Smooth Install

Once you buy Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD, you will find the included brackets are made for your vehicle, so the kit bolts on without cutting or drilling. Use fresh, high-temperature brake fluid when you bleed the system, tighten every bolt to the correct torque, and check that the new lines have enough slack and stay clear of moving suspension parts. Turn each wheel by hand before driving to confirm the caliper clears the inside of the rim with room to spare.

How to Bed In Your New Brakes

After you buy Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD, a careful bed-in procedure gets the best from fresh pads and rotors. Make several medium stops from about 40 mph to 10 mph, then a few harder stops from higher speeds, without holding the car stationary on hot brakes. A slow cool-down drive afterwards lets the pad material settle evenly onto the rotors, which gives you a firm pedal and consistent bite from the very first week.

Choosing the Right Pad Compound

Before you buy Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD, think about how you drive. Street-focused compounds give quiet operation, low dust and good cold bite for daily driving, while track compounds hold up to much higher temperatures without fading. If your car sees both commutes and occasional track days, a dual-purpose pad is often the best compromise. Our team can recommend a compound based on how you drive, your tyres and your power level, so you get the most from your purchase when you buy Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD.

Looking After Your Brakes

After you buy Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD, inspect the pads and rotors on a regular schedule and after every track day. Change the brake fluid at least once a year, since moisture lowers its boiling point. Wash the calipers with mild soap and water and avoid acidic wheel cleaners, which can dull the finish over time.

To learn more about the engineering behind these components, visit the official Endless website.

Fitment and Compatibility

Designed for the Mazda RX-7 FD. Exact fitment can vary with model year, trim and wheel design, so send us your VIN and wheel specification through our contact page and we will double-check everything before your kit ships.

Stop guessing and start braking later. Buy Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD from Diamond Parts, or call (303) 418-3426 and we will help you choose the right setup.

Reviews

There are no reviews yet.

Be the first to review “Endless Drift 6 Rear Brake Kit with 2-Piece Rotors for Mazda RX-7 FD”

Your email address will not be published. Required fields are marked *

© 2026 Diamond Car Parts. All rights reserved.