Description
Ready to buy Endless Racing MONO6 Sports and Inch-up Front and Rear Brake Kit with 2-Piece Rotors for Audi S3 8V? This front and rear upgrade pairs Endless Racing MONO6 Sports and Inch-up calipers with slit-face rotors, built specifically for the Audi S3 8V. The Audi S3 8V rewards drivers who push it, and a proper big brake upgrade adds the stopping power and heat capacity to match.
Why Buy Endless Racing MONO6 Sports and Inch-up Front and Rear Brake Kit with 2-Piece Rotors for Audi S3 8V from Diamond Parts?
We stock performance brake systems from leading brands such as Endless, AP Racing, Alcon and StopTech. Compare more big brake kits, see our complete brakes collection or shop Audi parts, and read our shipping policy for delivery times.
Key Features
Here is what you get when you buy Endless Racing MONO6 Sports and Inch-up Front and Rear Brake Kit with 2-Piece Rotors for Audi S3 8V:
- Forged Endless Racing MONO6 Sports calipers up front
- Endless Inch-up calipers at the rear
- Matched front and rear system for balanced braking
- Includes pads, brackets and brake lines
Endless Racing MONO6 Sports and Inch-up Front and Rear Brake Kit with 2-Piece Rotors for Audi S3 8V Specifications
| Product | Endless Racing MONO6 Sports and Inch-up Front and Rear Brake Kit with 2-Piece Rotors for Audi S3 8V |
|---|---|
| Brand | Endless |
| Product line | Racing MONO6 Sports / Inch-up |
| Position | Front and rear axle |
| Vehicle fitment | Audi S3 8V |
| Front caliper | Endless MONO6 Sports TA, forged monoblock, 6 pistons |
| Front caliper weight | 2,660 g each |
| Rear caliper | Endless Inch-up, forged |
| Rotors | 2-piece slit-face rotors |
| Pad compounds | SSM, TR, MX72 and MX72 Plus |
| Kit contents | 4 calipers, 4 rotors, front and rear pad sets, 4 mounting brackets and 4 brake lines |
| Caliper finish | Endless anodized finish |
| SKU | 90AA77C4 |
Installing Your New Brake Kit
When you buy Endless Racing MONO6 Sports and Inch-up Front and Rear Brake Kit with 2-Piece Rotors for Audi S3 8V from Diamond Parts, the kit comes with vehicle-specific mounting brackets, so installation is a bolt-on job for an experienced mechanic or a well-equipped home garage. Bleed the system with fresh, high-temperature brake fluid, torque all caliper and bracket bolts to specification, and make sure the brake lines are routed clear of the suspension and wheels at full steering lock. Before the first drive, spin each wheel by hand to confirm there is no contact between the caliper and the inside of the rim.
Bedding In the Pads and Rotors
After you buy Endless Racing MONO6 Sports and Inch-up Front and Rear Brake Kit with 2-Piece Rotors for Audi S3 8V and fit it, the new pads and rotors need a proper bed-in to perform at their best. Start with a series of moderate stops from around 40 mph down to 10 mph, then follow with several firmer stops from higher speeds, avoiding coming to a complete stop while the brakes are hot. Finish with a gentle drive to let everything cool. This lays an even layer of pad material onto the rotor faces for smooth, quiet and consistent braking.
Choosing the Right Pad Compound
Before you buy Endless Racing MONO6 Sports and Inch-up Front and Rear Brake Kit with 2-Piece Rotors for Audi S3 8V, think about how you drive. Street-focused compounds give quiet operation, low dust and good cold bite for daily driving, while track compounds hold up to much higher temperatures without fading. If your car sees both commutes and occasional track days, a dual-purpose pad is often the best compromise. Our team can recommend a compound based on how you drive, your tyres and your power level, so you get the most from your purchase when you buy Endless Racing MONO6 Sports and Inch-up Front and Rear Brake Kit with 2-Piece Rotors for Audi S3 8V.
Maintenance and Care
When you buy Endless Racing MONO6 Sports and Inch-up Front and Rear Brake Kit with 2-Piece Rotors for Audi S3 8V, plan a simple maintenance routine. Check pad thickness and rotor condition regularly, especially after track use. Replace brake fluid at least once a year, or before every track season, because fluid absorbs moisture and its boiling point drops over time. Clean the calipers with mild soap and water rather than harsh wheel cleaners to protect the finish.
To learn more about the engineering behind these components, visit the official Endless website.
Fitment and Compatibility
This kit is listed for the Audi S3 8V. Big brake kits must clear your wheels, so please check your wheel size and design before ordering. Not sure? Contact our team with your VIN and wheel details and we will confirm fitment for you.
Upgrade with confidence: Buy Endless Racing MONO6 Sports and Inch-up Front and Rear Brake Kit with 2-Piece Rotors for Audi S3 8V today, or call our parts team on (303) 418-3426 for advice.





Reviews
There are no reviews yet.