Description
Ready to buy Endless 6POT and Racing 4 Front and Rear Brake Kit for BMW 320i, 323i and 325i E90? This front and rear upgrade pairs forged Endless 6POT six-piston front calipers and Racing 4 rear calipers, built specifically for the BMW 320i, 323i and 325i E90. The E90 320i, 323i and 325i are well-balanced sedans that gain real confidence from upgraded brakes.
Why Buy Endless 6POT and Racing 4 Front and Rear Brake Kit for BMW 320i, 323i and 325i E90 from Diamond Parts?
We stock performance brake systems from leading brands such as Endless, AP Racing, Alcon and StopTech. Compare more big brake kits, see our complete brakes collection or shop BMW parts, and read our shipping policy for delivery times.
Key Features
Here is what you get when you buy Endless 6POT and Racing 4 Front and Rear Brake Kit for BMW 320i, 323i and 325i E90:
- Forged six-piston Endless 6POT front calipers
- Forged Racing 4 (EC450) four-piston rear calipers
- Matched front and rear system for balanced braking
- Complete kit with pads, brackets and brake lines
Endless 6POT and Racing 4 Front and Rear Brake Kit for BMW 320i, 323i and 325i E90 Specifications
| Product | Endless 6POT and Racing 4 Front and Rear Brake Kit for BMW 320i, 323i and 325i E90 |
|---|---|
| Brand | Endless |
| Product line | 6POT / Racing 4 |
| Position | Front and rear axle |
| Vehicle fitment | BMW 320i, 323i and 325i E90 |
| Front caliper | Endless 6POT (EC670), forged two-piece, 6 pistons |
| Front piston sizes | 27 mm, 32 mm and 38 mm |
| Front caliper weight | 3,280 g each |
| Front caliper size | 156 x 79 x 288.5 mm |
| Front rotor range | 320 mm to 370 mm |
| Rear caliper | Endless Racing 4 (EC450), forged, 4 pistons |
| Rear caliper weight | 2,500 g each |
| Rear caliper size | 141 x 73.2 x 266 mm |
| Parking brake | Factory parking brake retained |
| Rotors | Slit face front and rear (size is vehicle-specific) |
| Pad compounds | SSM, TR, MX72 and MX72 Plus |
| Kit contents | 4 calipers, 4 rotors, front and rear pad sets, 4 mounting brackets and 4 brake lines |
| Caliper finish | Endless blue anodize |
| Minimum wheel size | 17 inch (check wheel design) |
| SKU | D8961C8E |
Fitting Tips for a Smooth Install
Once you buy Endless 6POT and Racing 4 Front and Rear Brake Kit for BMW 320i, 323i and 325i E90, you will find the included brackets are made for your vehicle, so the kit bolts on without cutting or drilling. Use fresh, high-temperature brake fluid when you bleed the system, tighten every bolt to the correct torque, and check that the new lines have enough slack and stay clear of moving suspension parts. Turn each wheel by hand before driving to confirm the caliper clears the inside of the rim with room to spare.
How to Bed In Your New Brakes
After you buy Endless 6POT and Racing 4 Front and Rear Brake Kit for BMW 320i, 323i and 325i E90, a careful bed-in procedure gets the best from fresh pads and rotors. Make several medium stops from about 40 mph to 10 mph, then a few harder stops from higher speeds, without holding the car stationary on hot brakes. A slow cool-down drive afterwards lets the pad material settle evenly onto the rotors, which gives you a firm pedal and consistent bite from the very first week.
Choosing the Right Pad Compound
Before you buy Endless 6POT and Racing 4 Front and Rear Brake Kit for BMW 320i, 323i and 325i E90, think about how you drive. Street-focused compounds give quiet operation, low dust and good cold bite for daily driving, while track compounds hold up to much higher temperatures without fading. If your car sees both commutes and occasional track days, a dual-purpose pad is often the best compromise. Our team can recommend a compound based on how you drive, your tyres and your power level, so you get the most from your purchase when you buy Endless 6POT and Racing 4 Front and Rear Brake Kit for BMW 320i, 323i and 325i E90.
Looking After Your Brakes
After you buy Endless 6POT and Racing 4 Front and Rear Brake Kit for BMW 320i, 323i and 325i E90, inspect the pads and rotors on a regular schedule and after every track day. Change the brake fluid at least once a year, since moisture lowers its boiling point. Wash the calipers with mild soap and water and avoid acidic wheel cleaners, which can dull the finish over time.
To learn more about the engineering behind these components, visit the official Endless website.
Fitment and Compatibility
This kit is listed for the BMW 320i, 323i and 325i E90. Big brake kits must clear your wheels, so please check your wheel size and design before ordering. Not sure? Contact our team with your VIN and wheel details and we will confirm fitment for you.
Upgrade with confidence: Buy Endless 6POT and Racing 4 Front and Rear Brake Kit for BMW 320i, 323i and 325i E90 today, or call our parts team on (303) 418-3426 for advice.





Reviews
There are no reviews yet.